dmesg - 2048 MB DDR2-333MHz - AMD Athlon 64 3000
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
BIOS-e820: [mem 0x00000000d0000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: MSI MS-7250/MS-7250, BIOS V3.10 04/07/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask FF80000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x7fc00000-0x7fdfffff]
[mem 0x7fc00000-0x7fdfffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x7c000000-0x7fbfffff]
[mem 0x7c000000-0x7fbfffff] page 2M
init_memory_mapping: [mem 0x00100000-0x7bffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x7fe00000-0x7ffcffff]
[mem 0x7fe00000-0x7ffcffff] page 4k
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
RAMDISK: [mem 0x35b1a000-0x36d84fff]
ACPI: RSDP 00000000000f98b0 000014 (v00 ACPIAM)
ACPI: RSDT 000000007ffd0000 000038 (v01 MSIISM OEMRSDT 04000807 MSFT 00000097)
ACPI: FACP 000000007ffd0200 000084 (v02 MSIISM OEMFACP 04000807 MSFT 00000097)
ACPI: DSDT 000000007ffd0440 005045 (v01 1ADGH 1ADGH013 00000013 INTL 20051117)
ACPI: FACS 000000007ffde000 000040
ACPI: APIC 000000007ffd0390 000070 (v01 MSIISM OEMAPIC 04000807 MSFT 00000097)
ACPI: MCFG 000000007ffd0400 00003C (v01 MSIISM OEMMCFG 04000807 MSFT 00000097)
ACPI: OEMB 000000007ffde040 000061 (v01 MSIISM AMI_OEM 04000807 MSFT 00000097)
ACPI: HPET 000000007ffd5490 000038 (v01 MSIISM OEMHPET0 04000807 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
Scanning NUMA topology in Northbridge 24
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007ffcffff]
Initmem setup node 0 [mem 0x00000000-0x7ffcffff]
NODE_DATA [mem 0x7ffcb000-0x7ffcffff]
[ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007d600000-ffff88007f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0x7ffcffff]
On node 0 totalpages: 524142
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 520144 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10de8201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x80000000-0xcfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88007fc00000 s86336 r8192 d24256 u1048576
pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515929
Policy zone: DMA32
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 3780000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Memory: 2028076K/2096568K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 68492K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-1.
NR_IRQS:16640 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 8388608 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1799.837 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.67 BogoMIPS (lpj=7199348)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 Processor 3000+ (fam: 0f, model: 4f, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
x86: Booted up 1 node, 1 CPUs
smpboot: Total of 1 processors activated (3599.67 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:20:52, date: 02/20/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
node 0 link 0: io port [2000, 2fff]
TOM: 0000000080000000 aka 2048M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [80000000, fe0bffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x80000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
pci 0000:00:00.0: [10de:0369] type 00 class 0x050000
pci 0000:00:01.0: [10de:0362] type 00 class 0x060100
pci 0000:00:01.0: reg 0x10: [io 0x2f00-0x2f7f]
pci 0000:00:01.1: [10de:0368] type 00 class 0x0c0500
pci 0000:00:01.1: reg 0x10: [io 0x2900-0x293f]
pci 0000:00:01.1: reg 0x20: [io 0x2d00-0x2d3f]
pci 0000:00:01.1: reg 0x24: [io 0x2e00-0x2e3f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: System wakeup disabled by ACPI
pci 0000:00:02.0: [10de:036c] type 00 class 0x0c0310
pci 0000:00:02.0: reg 0x10: [mem 0xfbffb000-0xfbffbfff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.1: [10de:036d] type 00 class 0x0c0320
pci 0000:00:02.1: reg 0x10: [mem 0xfbffac00-0xfbffacff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: System wakeup disabled by ACPI
pci 0000:00:04.0: [10de:036e] type 00 class 0x01018a
pci 0000:00:04.0: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:05.0: [10de:037f] type 00 class 0x010185
pci 0000:00:05.0: reg 0x10: [io 0xd480-0xd487]
pci 0000:00:05.0: reg 0x14: [io 0xd400-0xd403]
pci 0000:00:05.0: reg 0x18: [io 0xd080-0xd087]
pci 0000:00:05.0: reg 0x1c: [io 0xd000-0xd003]
pci 0000:00:05.0: reg 0x20: [io 0xcc00-0xcc0f]
pci 0000:00:05.0: reg 0x24: [mem 0xfbff9000-0xfbff9fff]
pci 0000:00:05.1: [10de:037f] type 00 class 0x010185
pci 0000:00:05.1: reg 0x10: [io 0xc880-0xc887]
pci 0000:00:05.1: reg 0x14: [io 0xc800-0xc803]
pci 0000:00:05.1: reg 0x18: [io 0xc480-0xc487]
pci 0000:00:05.1: reg 0x1c: [io 0xc400-0xc403]
pci 0000:00:05.1: reg 0x20: [io 0xc080-0xc08f]
pci 0000:00:05.1: reg 0x24: [mem 0xfbff8000-0xfbff8fff]
pci 0000:00:05.2: [10de:037f] type 00 class 0x010185
pci 0000:00:05.2: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:05.2: reg 0x14: [io 0xbc00-0xbc03]
pci 0000:00:05.2: reg 0x18: [io 0xb880-0xb887]
pci 0000:00:05.2: reg 0x1c: [io 0xb800-0xb803]
pci 0000:00:05.2: reg 0x20: [io 0xb480-0xb48f]
pci 0000:00:05.2: reg 0x24: [mem 0xfbff7000-0xfbff7fff]
pci 0000:00:06.0: [10de:0370] type 01 class 0x060401
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:06.1: [10de:0371] type 00 class 0x040300
pci 0000:00:06.1: reg 0x10: [mem 0xfbff0000-0xfbff3fff]
pci 0000:00:06.1: PME# supported from D3hot D3cold
pci 0000:00:06.1: System wakeup disabled by ACPI
pci 0000:00:08.0: [10de:0373] type 00 class 0x068000
pci 0000:00:08.0: reg 0x10: [mem 0xfbff6000-0xfbff6fff]
pci 0000:00:08.0: reg 0x14: [io 0xb400-0xb407]
pci 0000:00:08.0: reg 0x18: [mem 0xfbffa800-0xfbffa8ff]
pci 0000:00:08.0: reg 0x1c: [mem 0xfbffa400-0xfbffa40f]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:08.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [10de:0374] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0c.0: [10de:0374] type 01 class 0x060400
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:0378] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:0e.0: [10de:0375] type 01 class 0x060400
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: System wakeup disabled by ACPI
pci 0000:00:0f.0: [10de:0377] type 01 class 0x060400
pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0f.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:00:06.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:06.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:06.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0e.0: PCI bridge to [bus 05]
pci 0000:06:00.0: [10de:0392] type 00 class 0x030000
pci 0000:06:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
pci 0000:06:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:06:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
pci 0000:06:00.0: reg 0x24: [io 0xec00-0xec7f]
pci 0000:06:00.0: reg 0x30: [mem 0xfebe0000-0xfebfffff pref]
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:0f.0: PCI bridge to [bus 06]
pci 0000:00:0f.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0f.0: bridge window [mem 0xfc000000-0xfebfffff]
pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 21 22 23) *10
ACPI: PCI Interrupt Link [LMAD] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 21 22 23) *11
ACPI: PCI Interrupt Link [LSMB] (IRQs 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 21 22 23) *10
ACPI: PCI Interrupt Link [LATA] (IRQs 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 21 22 23) *10
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0510 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0800-0x080f] has been reserved
system 00:07: [io 0x2000-0x207f] could not be reserved
system 00:07: [io 0x2080-0x20ff] has been reserved
system 00:07: [io 0x2400-0x247f] has been reserved
system 00:07: [io 0x2480-0x24ff] has been reserved
system 00:07: [io 0x2800-0x287f] has been reserved
system 00:07: [io 0x2880-0x28ff] has been reserved
system 00:07: [io 0x2c00-0x2c7f] has been reserved
system 00:07: [io 0x2c80-0x2cff] has been reserved
system 00:07: [mem 0x000d0000-0x000d3fff window] has been reserved
system 00:07: [mem 0x000d4000-0x000d7fff window] has been reserved
system 00:07: [mem 0x000de000-0x000dffff window] has been reserved
system 00:07: [mem 0xfbf80000-0xfbfbffff] has been reserved
system 00:07: [mem 0xfee01000-0xfeefffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
system 00:0c: [io 0x0a00-0x0a0f] has been reserved
system 00:0c: [io 0x0a10-0x0a1f] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0e: [mem 0xd0000000-0xdfffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
system 00:0f: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: bus type PNP unregistered
pci 0000:00:06.0: PCI bridge to [bus 01]
pci 0000:00:0b.0: PCI bridge to [bus 02]
pci 0000:00:0c.0: PCI bridge to [bus 03]
pci 0000:00:0d.0: PCI bridge to [bus 04]
pci 0000:00:0e.0: PCI bridge to [bus 05]
pci 0000:00:0f.0: PCI bridge to [bus 06]
pci 0000:00:0f.0: bridge window [io 0xe000-0xefff]
pci 0000:00:0f.0: bridge window [mem 0xfc000000-0xfebfffff]
pci 0000:00:0f.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x80000000-0xfebfffff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfebfffff]
pci_bus 0000:06: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:06:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18860K (ffff880035b1a000 - ffff880036d85000)
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1424431252.736:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 3997
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
pcieport 0000:00:0f.0: irq 44 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010400000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:02.1: EHCI Host Controller
ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:02.1: debug port 1
ehci-pci 0000:00:02.1: cache line size of 64 is not supported
ehci-pci 0000:00:02.1: irq 22, io mem 0xfbffac00
ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:02.0: OHCI PCI host controller
ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:02.0: irq 23, io mem 0xfbffb000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 3:913:327
rtc_cmos 00:01: setting system clock to 2015-02-20 11:20:53 UTC (1424431253)
[Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[93]: starting version 204
pata_amd 0000:00:04.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
sata_nv 0000:00:05.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
sata_nv 0000:00:05.0: Using SWNCQ mode
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd480 ctl 0xd400 bmdma 0xcc00 irq 21
ata4: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xcc08 irq 21
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ata2: port disabled--ignoring
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
ata3: SATA link down (SStatus 0 SControl 300)
usb 2-2: new low-speed USB device number 2 using ohci-pci
forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:41:81:30
forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
sata_nv 0000:00:05.1: Using SWNCQ mode
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc080 irq 23
ata6: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xc088 irq 23
usb 2-2: New USB device found, idVendor=0000, idProduct=0538
usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-2: Product: USB OPTICAL MOUSE
ata4: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 22
sata_nv 0000:00:05.2: Using SWNCQ mode
scsi6 : sata_nv
scsi7 : sata_nv
ata7: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
ata8: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input5
hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-2/input0
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-4: new low-speed USB device number 3 using ohci-pci
ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata7.00: ATAPI: ATAPI iHAS124 E, 4L08, max UDMA/100
ata7.00: configured for UDMA/100
usb 2-4: New USB device found, idVendor=1a2c, idProduct=0c23
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: USB Keyboard
usb 2-4: Manufacturer: USB
ata6: SATA link down (SStatus 0 SControl 300)
scsi 6:0:0:0: CD-ROM ATAPI iHAS124 E 4L08 PQ: 0 ANSI: 5
input: USB USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input6
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
hid-generic 0003:1A2C:0C23.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:02.0-4/input0
sr 6:0:0:0: Attached scsi CD-ROM sr0
sr 6:0:0:0: Attached scsi generic sg0 type 5
input: USB USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/input/input7
hid-generic 0003:1A2C:0C23.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:02.0-4/input1
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-9: SanDisk SDSSDP128G, 3.2.0, max UDMA/133
ata8.00: 246162672 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata8.00: configured for UDMA/133
scsi 7:0:0:0: Direct-Access ATA SanDisk SDSSDP12 3.2. PQ: 0 ANSI: 5
sd 7:0:0:0: [sda] 246162672 512-byte logical blocks: (126 GB/117 GiB)
sd 7:0:0:0: Attached scsi generic sg1 type 0
sd 7:0:0:0: [sda] Write Protect is off
sd 7:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 7:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 79 bits of entropy available
init: plymouth-upstart-bridge main process (154) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (164) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (173) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (176) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
random: nonblocking pool is initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
systemd-udevd[286]: starting version 204
lp: driver loaded but no devices found
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
lp0: using parport0 (interrupt-driven).
i2c i2c-0: nForce2 SMBus adapter at 0x2d00
i2c i2c-1: nForce2 SMBus adapter at 0x2e00
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot not detected
nv_tco: initialized (0x2440). heartbeat=30 sec (nowayout=0)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
type=1400 audit(1424427658.731:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=393 comm="apparmor_parser"
type=1400 audit(1424427658.731:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=393 comm="apparmor_parser"
type=1400 audit(1424427658.731:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser"
type=1400 audit(1424427658.751:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=393 comm="apparmor_parser"
type=1400 audit(1424427658.751:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser"
type=1400 audit(1424427658.751:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=393 comm="apparmor_parser"
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
forcedeth 0000:00:08.0: irq 45 for MSI/MSI-X
forcedeth 0000:00:08.0 eth0: MSI enabled
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
hda_intel: Disabling MSI
hda-intel 0000:00:06.1: Disabling 64bit DMA
hda-intel 0000:00:06.1: Enable delay in RIRB handling
wmi: Mapper loaded
kvm: Nested Virtualization enabled
checking generic (c0000000 500000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[drm] hdmi device not found 6 0 1
nouveau [ DEVICE][0000:06:00.0] BOOT0 : 0x04b200a2
nouveau [ DEVICE][0000:06:00.0] Chipset: G73 (NV4B)
nouveau [ DEVICE][0000:06:00.0] Family : NV40
nouveau [ VBIOS][0000:06:00.0] checking PRAMIN for image...
nouveau [ VBIOS][0000:06:00.0] ... appears to be valid
nouveau [ VBIOS][0000:06:00.0] using image from PRAMIN
nouveau [ VBIOS][0000:06:00.0] BIT signature found
nouveau [ VBIOS][0000:06:00.0] version 05.73.22.16.02
nouveau 0000:06:00.0: irq 46 for MSI/MSI-X
nouveau [ PMC][0000:06:00.0] MSI interrupts enabled
nouveau [ PFB][0000:06:00.0] RAM type: DDR2
nouveau [ PFB][0000:06:00.0] RAM size: 256 MiB
nouveau [ PFB][0000:06:00.0] ZCOMP: 379904 tags
SKU: Nid=0x1d sku_cfg=0x4007f603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x000000f6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
init: failsafe main process (548) killed by TERM signal
autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0883
ppdev: user-space parallel port driver
nouveau [ PTHERM][0000:06:00.0] FAN control: toggle
nouveau [ PTHERM][0000:06:00.0] fan management: automatic
nouveau [ PTHERM][0000:06:00.0] internal sensor: yes
nouveau [ CLK][0000:06:00.0] 20: core 400 MHz shader 400 MHz memory 400 MHz
nouveau [ CLK][0000:06:00.0] --: core 400 MHz shader 400 MHz memory 405 MHz
[TTM] Zone kernel: Available graphics memory: 1024892 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau [ DRM] VRAM: 251 MiB
nouveau [ DRM] GART: 512 MiB
nouveau [ DRM] TMDS table version 1.1
nouveau W[ DRM] TMDS table script pointers not stubbed
nouveau [ DRM] DCB version 3.0
nouveau [ DRM] DCB outp 00: 01000300 00000028
nouveau [ DRM] DCB outp 01: 03000302 00000000
nouveau [ DRM] DCB outp 02: 04011310 00000028
nouveau [ DRM] DCB outp 03: 04011312 00c00000
nouveau [ DRM] DCB outp 04: 020223f1 0000c080
nouveau [ DRM] DCB conn 00: 1030
nouveau [ DRM] DCB conn 01: 2130
nouveau [ DRM] DCB conn 02: 0210
nouveau [ DRM] DCB conn 03: 0211
nouveau [ DRM] DCB conn 04: 0213
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
nouveau [ DRM] 0xD1A1: Parsing digital output script table
nouveau [ DRM] 0xD1F1: Parsing digital output script table
nouveau [ DRM] MM: using M2MF for buffer copies
nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 4)
nouveau [ DRM] allocated 1920x1080 fb: 0x9000, bo ffff88007b45e000
fbcon: nouveaufb (fb0) is primary device
nouveau [ DRM] 0xD1A1: Parsing digital output script table
Console: switching to colour frame buffer device 240x67
nouveau 0000:06:00.0: fb0: nouveaufb frame buffer device
nouveau 0000:06:00.0: registered panic notifier
[drm] Initialized nouveau 1.1.1 20120801 for 0000:06:00.0 on minor 0
type=1400 audit(1424427661.223:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=720 comm="apparmor_parser"
type=1400 audit(1424427661.223:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=720 comm="apparmor_parser"
type=1400 audit(1424427661.223:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=720 comm="apparmor_parser"
type=1400 audit(1424427661.223:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=720 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:06.1/sound/card0/input14
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:06.1/sound/card0/input13
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:06.1/sound/card0/input12
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:06.1/sound/card0/input11
input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input10
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input9
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
init: upstart-udev-bridge main process (279) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (417) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (704) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-udev-bridge main process (29993) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-socket-bridge main process (29997) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
init: upstart-file-bridge main process (29998) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-udev-bridge main process (4315) terminated with status 1
init: upstart-udev-bridge main process ended, respawning
init: upstart-file-bridge main process (4329) terminated with status 1
init: upstart-file-bridge main process ended, respawning
init: upstart-socket-bridge main process (4331) terminated with status 1
init: upstart-socket-bridge main process ended, respawning
show_signal_msg: 9 callbacks suppressed
crafty[20770]: segfault at 0 ip 00007f75a0294070 sp 00007fffcc195fd8 error 4 in libc-2.19.so[7f75a0222000+1bb000]
crafty[20774]: segfault at 0 ip 00007f21bdfd0070 sp 00007fff411ce518 error 4 in libc-2.19.so[7f21bdf5e000+1bb000]
crafty[20778]: segfault at 0 ip 00007f857c45a070 sp 00007fff8d064f98 error 4 in libc-2.19.so[7f857c3e8000+1bb000]